|
INDIRECT FIRED DIESEL HEATERS
Specifications: View | Download
INDIRECT
FIRED NG
& PROPANE HEATERS
Specifications: View | Download
|
DIRECT FIRED DIESEL HEATERS
Specs Coming Soon
DIRECT FIRED NG
& PROPANE HEATERS
Specifications: View | Download |
|
Applications:
• Commercial Construction
• Custom Construction
• Special Events
• Tent Heating
• Concrete Curing
• Moisture Control
• Equipment Preheating
• Ground Thawing
• Preheat Aircraft & Equipment
• Drywall Finishing
• Plaster & Paint Curing |
Features:
• Ductable
Heating & Emissions (Indirect Fired)
• Lowest Emissions in the Industry (Direct Fired)
• International ETL approval - Surpasses AGA/CGA
• Stainless Steel High Efficiency Burner
• Suitable for Propane or Natural Gas Hook-up
• Low Housing Temperatures
• Powder Coated Steel - Resists Rust
• Tip Resistant Frame
• BTU Range: 200,000 thru 1,500,000 |
| |
| Electric Indirect Fin Tubular Heating |
 |
ASCF - 1700
Heavy Duty Direct Convection Heater
Light enough to carry yet provides heat for small sized areas. These medium-duty units of various types and sizes include protective steel intake and discharge grills. Permanently lubricated motor and four foot cord reduce maintenance and labor associated with operation of the unit. Thermostat provides temperature control, while safety temperature limit and tip over switch prevents overheating.
• Watts: 1700/1200
• Voltage: 120 /1ph
• BtuH: 5,800/4900
• Amps AC: 12/8
• Height: 17"
• Width: 10"
• Depth: 8"
• Weight: 6#
• NEMA Plug: 5-15/20P
Built-in Controls:
Yes, with Fan Speed
Application:
Construction, Space Heat Failure, Spot Heating |
| |
|
 |
ASCB - 5600
Heavy Duty Indirect Fin Tubular Convection Blower / Heater
Light enough to carry, yet provides heat for medium sized areas. These construction-duty units include protective steel intake and discharge grills. Permanently lubricated motor and cord reduce maintenance and labor associated with operation of the unit. Thermostat provides temperature control, while safety temperature limit prevents overheating. SO Power drops and Pig tails available upon request.
• Watts: 5600/4200
• Voltage: 240/208/1ph
• BtuH: 19,110/14,335
• Amps AC: 23.3/20.2
• Height: 16"
• Width: 12"
• Depth: 12"
• Weight: 12#
• NEMA Plug: 6-30P
Built-in Controls:
Yes, with T- Stat, Auto run
Application:
Construction, Boiler Failure, Spot Heating |
| |
|
 |
ASCRDRA-15
Heavy Duty Indirect Fin Tubular Industrial Heater / Blower
The ASCR is a rugged industrial grade, self contained, highly mobile, electric blower heater. The ASCR can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermostat provides settings for full off, fan only and temperature control in the heating setting. ASCR heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. SO Power drops and Pig tails available upon request.
• 7.5 to 30 kW
• Voltage: 240/208 / 3ph
• BtuH: 25,590 to 102,360 BTUH
• Amps AC: 23.3/20.2
• Height: 35”
• Width: 24”
• Depth: 24”
• Weight: 100#
• NEMA Plug: 15-50P
Built-in Controls:
Yes, with T-Stat, Voltage Switch and Fan
Application:
Construction, Boiler Failure, Dry out, Spot Heating |
| |
|
 |
ASDRA-60
Industrial Duty Indirect Fin Tubular Heater / Blower
The ASDRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The ASDRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include adjustable twin thermostats to control inlet and outlet air temperature, auto reset cutouts for the fan motor and heating elements. The thermostat controls provide settings for full off, fan only and temperature control in the heating setting. Contractor grade heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 volt units. Power switching box allows either 480/3ph or 240/3ph. The red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. SO Power drops and Pig tails available upon request. Inlet and Discharge Hi temp Ducting.
• 60 / 15 KW
• Voltage: 480/240
• BtuH: 204,720, 51,180
• Amps AC: 75/37
• Height: 37"
• Width: 30"
• Depth: 46"
• Weight: 350#
• NEMA Plug: Cam Quick Connect – 4-2/100
Built-in Controls:
Yes, with T- Stat, 2 Voltage Control, Fan and Heater Contols
Application:
Construction, Boiler Failure, Dry Out, Spot Heating |
